RBSS-PS1-868 · Perimeter Intrusion · Manuals

User Manual & Installation Guide: Passive Infrared Motion Sensor (PIR)

The RBSS-PS1 Indoor PIR Motion Sensor detects human movement up to 12 m across a 110° angle with 10 kg pet immunity, 2000 lux white light filtering, digital temperature compensation, and up to 3100 m RBF 868 MHz transmission range.

Complete User Manual and Installation Guide: pairing walkthrough, mounting & wiring, daily operation, LED indicators, and maintenance.

BuyDevice Overview Page
Passive Infrared Motion Sensor (PIR) (RBSS-PS1-868)

01. Pairing & Initial Setup

  1. 1Open your hub in RB Link, tap "+", and choose "Add peripheral".
  2. 2Pull out the battery insulation strip—the green indicator flashes and the PIR sensor appears in the app.
  3. 3If needed, hold the registration button for 5 seconds to force pairing mode.
  4. 4Assign a room and tap "Done".

02. Verification & Signal Strength Test

  1. 1Run Settings → Signal Strength Test in RB Link: Flashing Green = strong, Orange = medium, Red = weak.
  2. 2Enable "Installation test" and walk across the detection area; red LED flashes confirm detection.

03. Installation & Mounting Guide

  1. 1Recommended mounting height: 1.8 m to 2.4 m.
  2. 2Use Bracket A (flat wall) or Bracket B (corner mount) with screws to keep rear tamper protection active.
  3. 3Adhesive 3M strip mounting is supported for smooth surfaces (note: disables rear tamper detection).

04. User Manual (Daily Operation & Maintenance)

  1. 1Configure zone behavior in RB Link (Instant alarm, Entry/Exit delay, or Stay-bypassed for nighttime movement indoors).
  2. 2Adjust PIR sensitivity levels in app settings to match room size and pets up to 10 kg.
  3. 3During standby operation the LED stays dark to preserve up to 5-year CR123A battery life; re-verify walk-test after battery replacement.

05. LED & Acoustic Status Indicators

State / ActionIndicatorMeaning
Motion detected (test)Flashing RedInfrared movement detected inside zone.
Pairing / Find meFlashing GreenReady to pair or responding to Find me.
Signal Strength TestGreen / Orange / RedStrong / Medium / Poor hub signal link.

07. Full Technical Specifications

Model
RBSS-PS1-868
Detection Range
Up to 12 m · 110° Horizontal
Pet Immunity
≤ 10 kg
White Light Filter
2000 lux
Wireless Range
RBF 868 MHz · up to 3100 m open space
Battery Life
CR123A × 1 · up to 5 years standby
Tamper Protection
Rear bracket tamper switch
Mounting Height
1.8 m – 2.4 m
Dimensions & Weight
114.7 × 61.2 × 43.8 mm · 102 g

09. Device Questions & Answers

Does RBSS-PS1-868 support pet immunity?

Yes, the official datasheet specifies pet immunity up to 10 kg alongside digital temperature compensation.

How do I verify detection after mounting the PIR sensor?

Per the Quick Start Guide, start "Installation test" in RB Link and walk across the room—the LED flashes RED when motion is detected properly.

How do I power on and mount the sensor?

Pull out the battery insulation strip for auto-pairing (or hold the register button for 5 seconds). Mount using wall bracket A, bracket B, or the 3M strip.

Consultation & System Sizing

Design a RoomBanker Setup Tailored to Your Property

Share your property layout and security goals—our Riga engineering team will recommend the right 868 MHz sensor kit and guide you to order on our main website.

SIA "Apsardze 24"

VAT / Tax ID LV40003889451

Latgales 293-5, Riga, LV-1063, Latvia