RBSS-MC1-868 · Perimeter Intrusion · Manuals

User Manual & Installation Guide: Magnetic Door & Window Sensor (MC1)

The RBSS-MC1 Door/Window Sensor detects opening gaps beyond 17 mm with up to 1900 m RBF 868 MHz wireless range, rear tamper protection, and up to 5.5 years of standby battery life from a single AA cell.

Complete User Manual and Installation Guide: pairing walkthrough, mounting & wiring, daily operation, LED indicators, and maintenance.

BuyDevice Overview Page
Magnetic Door & Window Sensor (MC1) (RBSS-MC1-868)

01. Pairing & Initial Setup

  1. 1Open your hub in RB Link, tap "+", and choose "Add peripheral".
  2. 2Pull the battery insulation tab—the green indicator flashes and the sensor appears automatically.
  3. 3If undetected, hold the registration button for 5 seconds.
  4. 4Assign a room and tap "Done".

02. Verification & Signal Strength Test

  1. 1Run Settings → Signal Strength Test before mounting to confirm a green or orange link.
  2. 2Open and close the door/window to verify instant state updates in RB Link.

03. Installation & Mounting Guide

  1. 1Clean and dry the mounting surfaces.
  2. 2Attach the sensor body to the fixed frame and align the magnet parallel on the moving leaf using the 3M adhesive strip.
  3. 3Keep the alignment marks facing each other with a closed gap under 10 mm.

04. User Manual (Daily Operation & Maintenance)

  1. 1Open-door reminders: RB Link alerts you before arming if any protected window or door remains open.
  2. 2Doorbell / Chime mode: enable acoustic chimes on indoor sirens when the front door opens during disarmed hours.
  3. 3Battery replacement (up to 5.5 years standby): slide off the cover and insert a fresh 1.5V AA cell observing polarity.

05. LED & Acoustic Status Indicators

State / ActionIndicatorMeaning
Pairing / Find meFlashing GreenEnrolling or responding to Find me.
Contact triggerBrief LED flashDoor/window state change transmitted.
Signal Strength TestGreen / Orange / RedStrong / Medium / Poor signal.

07. Full Technical Specifications

Model
RBSS-MC1-868
Detection Method
Magnetic reed switch
Trigger Gap
> 17 mm
Wireless Range
RBF 868 MHz · up to 1900 m open space
Battery Life
1 × AA battery · up to 5.5 years
Tamper Switch
Rear tamper protection
Operating Temp
-10 °C to +55 °C
Dimensions & Weight
82×42×16 mm (Body), 82×11×18 mm (Magnet) · 55.6 g

09. Device Questions & Answers

What separation gap triggers the RBSS-MC1-868 sensor?

The official specification lists a reed switch detection gap of > 17 mm.

How is the sensor mounted and protected against removal?

Per the Quick Start Guide, mount it on the door or window using the 3M adhesive strip; a rear tamper switch detects forced removal.

How can I identify one specific door sensor in a large building?

Enable "Find me" in the RB Link app so the target sensor flashes green.

Consultation & System Sizing

Design a RoomBanker Setup Tailored to Your Property

Share your property layout and security goals—our Riga engineering team will recommend the right 868 MHz sensor kit and guide you to order on our main website.

SIA "Apsardze 24"

VAT / Tax ID LV40003889451

Latgales 293-5, Riga, LV-1063, Latvia