RBGW-RE1-868 · Core & Radio · Manuals

User Manual & Installation Guide: Wireless Repeater RBF 868 MHz

The RoomBanker RBGW-RE1 Wireless Repeater extends 868 MHz RBF radio range across multi-story buildings, thick masonry structures, and warehouses, managing communication for up to 128 devices with up to 40 hours of battery backup.

Complete User Manual and Installation Guide: pairing walkthrough, mounting & wiring, daily operation, LED indicators, and maintenance.

BuyDevice Overview Page
Wireless Repeater RBF 868 MHz (RBGW-RE1-868)

01. Pairing & Initial Setup

  1. 1Open your Home Security Hub in RB Link, tap "+", and choose "Add peripheral".
  2. 2Pull out the insulation strip or connect Type-C 5V / 2A power—the green LED flashes and the repeater appears in the app.
  3. 3If it does not appear automatically, press and hold the register button for 5 seconds.
  4. 4Assign a room and tap "Done" to complete pairing.

02. Verification & Signal Strength Test

  1. 1Run Settings → Signal Strength Test in RB Link before drilling.
  2. 2Place the repeater midway between the hub and distant sensors: Flashing Green indicates strong signal, Orange medium, and Red weak/no signal.
  3. 3Use "Find me" in the app to blink the repeater LED for quick identification.

03. Installation & Mounting Guide

  1. 1Select a midpoint where hub signal strength reads green before final mounting.
  2. 2Wall mounting: secure the bracket with screws near a wall socket and latch the repeater onto the plate.
  3. 3Desktop placement: rest flat on a non-metallic shelf clear of electrical distribution cabinets.

04. User Manual (Daily Operation & Maintenance)

  1. 1Assign distant sensors to route through RBGW-RE1 inside RB Link device settings for optimal path stability.
  2. 2Power backup: during a 230V outage, the built-in 2500 mAh battery sustains relay traffic for up to 40 hours and notifies users.
  3. 3Check link diagnostics periodically and install OTA firmware updates only with Type-C mains power connected.

05. LED & Acoustic Status Indicators

State / ActionIndicatorMeaning
Pairing activeFlashing GreenReady to enroll onto the hub.
Strong signalFlashing Green (test)Optimal mounting position.
Medium signalFlashing Orange (test)Acceptable installation location.
Weak / lost signalFlashing Red (test)Move repeater closer to the hub.

07. Full Technical Specifications

Model
RBGW-RE1-868
Max Relayed Devices
Up to 128 RBF peripherals
Radio Technology
RBF 868 MHz (Two-way, AES-128)
Power Input
Type-C 5V / 2A
Backup Battery
2500 mAh 18650 (up to 40 h backup)
Firmware Update
OTA via RB Link app
Operating Temp
-10 °C to +45 °C
Dimensions & Weight
150 × 150 × 37 mm · 314 g
Certifications
CE, RoHS

09. Device Questions & Answers

How do I pair the RBGW-RE1-868 repeater with the hub?

Tap "+" → "Add peripheral" in the RB Link app and power on the repeater for auto-enrolling. If the green LED stays off, press and hold the register button for 5 seconds.

How do I verify signal strength at the mounting spot?

Run "Signal Strength Test" in RB Link: Green indicates strong reception, Orange means medium, and Red signals weak reception.

Does the repeater stay online during a power outage?

Yes, the unit includes an internal backup battery and also supports the "Find me" green LED locator.

Consultation & System Sizing

Design a RoomBanker Setup Tailored to Your Property

Share your property layout and security goals—our Riga engineering team will recommend the right 868 MHz sensor kit and guide you to order on our main website.

SIA "Apsardze 24"

VAT / Tax ID LV40003889451

Latgales 293-5, Riga, LV-1063, Latvia