RBAD-TR1-868 · Core & Radio · Manuals

User Manual & Installation Guide: Wired-to-Wireless Alarm Transmitter

The Wireless Transmitter (RBAD-TR1-868) bridges third-party wired NC/NO detectors, glass-break sensors, gas alarms, or panic buttons into RoomBanker over 868 MHz RBF, providing 3.3V / 30 mA auxiliary power and programmable PO+/PO- output.

Complete User Manual and Installation Guide: pairing walkthrough, mounting & wiring, daily operation, LED indicators, and maintenance.

BuyDevice Overview Page
Wired-to-Wireless Alarm Transmitter (RBAD-TR1-868)

01. Pairing & Initial Setup

  1. 1Open your hub in RB Link, tap "+", and choose "Add peripheral".
  2. 2Insert three CR123A batteries—the green LED flashes and the transmitter appears in RB Link.
  3. 3Hold the register button for 5 seconds if manual discovery is needed.
  4. 4Wire your detector to ALARM / TAMP terminals and select NC/NO state plus one of the 9 event types in the app.

02. Verification & Signal Strength Test

  1. 1Run Settings → Signal Strength Test (up to 1500 m open-field RBF range).
  2. 2Trigger the external wired detector and verify the matching event arrives in RB Link.

03. Installation & Mounting Guide

  1. 1Mount the module using the 4 PCB standoffs inside a third-party detector housing or junction enclosure.
  2. 2Terminals: "+ –" = 3.3V / 30 mA aux power; "PO+ PO-" = open-collector output; "ALARM" = NC/NO zone input; "TAMP" = NC/NO tamper input.
  3. 3Keep total wired zone cable runs under 130 m.

04. User Manual (Daily Operation & Maintenance)

  1. 1Configure NC/NO polarity, bistable vs. pulse detection, and one of the 9 alarm event profiles inside RB Link.
  2. 2Activate Find me in RB Link to blink green (1s on/off for 30s) when identifying hidden modules.
  3. 3Replace all three CR123A batteries together when low-battery notices appear.

05. LED & Acoustic Status Indicators

State / ActionIndicatorMeaning
Alarm activeFlashing RedExternal ALARM or TAMP line triggered.
Find meGreen (1s / 1s, 30s timeout)Device locator active.
Signal StrengthGreen / RedGood signal / Bad or no signal.

07. Full Technical Specifications

Model
RBAD-TR1-868
Wired Inputs
ALARM (NC/NO) + TAMP (NC/NO), Bistable or Pulse
Aux Outputs
3.3V / 30 mA DC power + PO+/PO- open-collector
Event Types
9 (Intrusion, Fire, Aux, Panic, Gas, Water, Glass, Vibration, Custom)
Max Cable Length
130 m
Wireless Range
RBF 868 MHz · up to 1500 m
Battery Supply
3 × CR123A
Operating Temp
-20 °C to +65 °C
Dimensions & Weight
100 × 41 × 23 mm · 33 g (excl. batteries)

09. Device Questions & Answers

Which wired devices work with RBAD-TR1-868?

It integrates any third-party detector, keypad, or panic button with NC or NO contact types into the RoomBanker RBF system.

Can the transmitter power the attached wired sensor?

Yes, the specification states it can output 3.3 V / 30 mA power and NC/NO signals to a third-party device.

How is it powered and located with Find me?

Insert 3 batteries to auto-pair (or hold the register button 5s). Activating "Find me" flashes the green indicator (1s on / 1s off) for 30 seconds.

Consultation & System Sizing

Design a RoomBanker Setup Tailored to Your Property

Share your property layout and security goals—our Riga engineering team will recommend the right 868 MHz sensor kit and guide you to order on our main website.

SIA "Apsardze 24"

VAT / Tax ID LV40003889451

Latgales 293-5, Riga, LV-1063, Latvia