RBAD-WS1-868 · Control & Relays · Manuals

User Manual & Installation Guide: Smart Wall Switch Module (110/230V AC)

The In-Wall Smart Switch (RBAD-WS1-868) fits behind standard wall switches, handling up to 13A / 3000W (110V/230V AC) with built-in power, voltage, and current metering plus 1900 m RBF 868 MHz control.

Complete User Manual and Installation Guide: pairing walkthrough, mounting & wiring, daily operation, LED indicators, and maintenance.

BuyDevice Overview Page
Smart Wall Switch Module (110/230V AC) (RBAD-WS1-868)

01. Pairing & Initial Setup

  1. 1Turn off the circuit breaker before wiring.
  2. 2Wire 110V/230V AC supply and load using the terminal block, then restore power.
  3. 3In RB Link, tap "+" to add the switch by scanning its QR code (or via power-up auto-enrolling).
  4. 4Assign a room and tap "Done".

02. Verification & Signal Strength Test

  1. 1Run Signal Strength Test before sealing the wall box.
  2. 2Verify remote switching, physical wall rocker input, and live watt metering inside RB Link.

03. Installation & Mounting Guide

  1. 1Isolate mains power at the breaker panel and confirm zero voltage.
  2. 2Terminate mains L/N, load, and optional wall switch wires neatly into the terminal block.
  3. 3Seat the 40×35×20 mm module inside a deep wall junction box behind the faceplate.

04. User Manual (Daily Operation & Maintenance)

  1. 1Control circuits locally via the existing wall switch or remotely through RB Link schedules and arming scenes.
  2. 2Monitor live voltage, current, wattage, and kWh energy history inside the device screen.
  3. 3Keep total connected load within 13A / 3000W and isolate breakers before servicing.

05. LED & Acoustic Status Indicators

State / ActionIndicatorMeaning
Mains powerGreen power LEDMains voltage present.
Switch ON / OFFBlue ON / OffAC relay output status.
Signal StrengthGreen / Orange / RedStrong / Medium / Poor signal.

07. Full Technical Specifications

Model
RBAD-WS1-868
Power Input
AC 110V/230V, 50/60 Hz
Rated Output
1 × NO/NC, Max 13A / Max 3000W
Energy Metering
Current, Voltage & Power
Wireless Range
RBF 868 MHz · up to 1900 m
Dimensions & Weight
40 × 35 × 20 mm · 29.3 g

09. Device Questions & Answers

What wall box and voltage does RBAD-WS1-868 support?

It fits a standard 86 electrical box and connects to a 110V or 230V AC supply using the supplied terminal block.

Does it provide energy monitoring?

Yes, the official spec confirms monitoring for current, voltage, and power consumption alongside RB Link Smart Scenes.

How is the wall switch paired with the hub?

After wiring 110/230V AC power, open the hub in RB Link, tap "+", and scan the device QR code.

Consultation & System Sizing

Design a RoomBanker Setup Tailored to Your Property

Share your property layout and security goals—our Riga engineering team will recommend the right 868 MHz sensor kit and guide you to order on our main website.

SIA "Apsardze 24"

VAT / Tax ID LV40003889451

Latgales 293-5, Riga, LV-1063, Latvia