RBAD-RL1-868 · Control & Relays · Manuals

User Manual & Installation Guide: Smart Low-Voltage Relay (Dry Contact)

The Low-Voltage Dry-Contact Relay (RBAD-RL1-868) accepts 7–24V DC supply and switches NO/NC dry contacts (0–36V DC, max 5A) for gates, electric locks, water shutoff valves, and automation scenes up to 1900 m away.

Complete User Manual and Installation Guide: pairing walkthrough, mounting & wiring, daily operation, LED indicators, and maintenance.

BuyDevice Overview Page
Smart Low-Voltage Relay (Dry Contact) (RBAD-RL1-868)

01. Pairing & Initial Setup

  1. 1Open your hub in RB Link, tap "+", and choose "Add peripheral".
  2. 2Connect 7–24V DC power—the green indicator flashes and the relay shows up in the app.
  3. 3Hold the switch button for 5 seconds if manual discovery is needed.
  4. 4Assign a room and tap "Done".

02. Verification & Signal Strength Test

  1. 1Run Signal Strength Test inside the control enclosure.
  2. 2Toggle the relay in RB Link and confirm the blue relay LED turns ON/OFF.

03. Installation & Mounting Guide

  1. 1Disconnect 7–24V DC power before touching terminals.
  2. 2Wire the 7–24V DC supply observing polarity at the power input terminals.
  3. 3Connect the controlled load (0–36V DC, max 5A) across dry-contact NO/NC terminals and mount inside a plastic enclosure.

04. User Manual (Daily Operation & Maintenance)

  1. 1Select bistable toggle mode (valves, lighting) or timed pulse mode (e.g., 1–2s gate openers) in RB Link.
  2. 2Create safety rules linking RBSS-WL1 water leak alerts to trigger relay shutoff automatically.
  3. 3Use the on-board button for manual override or trigger Find me from RB Link for quick identification.

05. LED & Acoustic Status Indicators

State / ActionIndicatorMeaning
Power presentGreen power LED7–24V DC input active.
Relay ON / OFFBlue ON / OffDry-contact state.
Signal StrengthGreen / Orange / RedRBF link strength.

07. Full Technical Specifications

Model
RBAD-RL1-868
Power Input
DC 7 V to 24 V
Relay Output
1 × NO/NC (0–36V DC, Max 5A)
Wireless Range
RBF 868 MHz · up to 1900 m
Operating Temp
-10 °C to +55 °C
Dimensions & Weight
40 × 35 × 20 mm · 25.7 g

09. Device Questions & Answers

What power supply and load does RBAD-RL1-868 support?

The specification describes it as a dry-contact relay controlling 6–36V⎓ circuits, wired to a 7–24V DC power supply per the Quick Start Guide.

What Smart Scene triggers are available?

RB Link supports scenes triggered By Alarm, By Operation, By Fault, and By Schedule, plus local physical button switching.

How do I pair and test signal strength?

Connect 7–24V DC power while adding a peripheral in RB Link (hold power button 5s if the green LED stays off), then run Signal Strength Test or Find me.

Consultation & System Sizing

Design a RoomBanker Setup Tailored to Your Property

Share your property layout and security goals—our Riga engineering team will recommend the right 868 MHz sensor kit and guide you to order on our main website.

SIA "Apsardze 24"

VAT / Tax ID LV40003889451

Latgales 293-5, Riga, LV-1063, Latvia